The LTD 12 contains a 12" (300mm) LF driver and a 1.75" (44mm?diameter titanium diaphragm. The UK Fane driver uses a lightweight aluminum voice coil, which is mounted on a rotatable 80° x 50° constant directivity HF horn. The LF driver has a tough, water resistant cone and features a high BL motor with a flat-wire copper coil and an aluminum-demodulating ring. This reduces intermodulation distortion and improves midrange performance when driven hard. The directivity of the LF driver has been matched to the HF horn in the crossover region by improved crossover design and cone profile optimization, also the HF compression driver utilizes an ultra-lightweight diaphragm for extended high frequency response.
Features
Applications
Specifications
Driver: | 1x12"3"VC +1.75" HF |
Impedance: | 8ohm |
Freq Response: | 52Hz-18kHz |
Power Rating: | 350W/700W |
SPL(1W/1M): | 98dB / 123dB |
Coverage: | 80° x 50° |
Dimensions: | 398x571x365 |
Weight: | 24 |
Extended frequency response is provided by a 15” (380mm) UK Fane LF driver and a 2.8” (74mm) compression driver. It is mounted on a rotatable 90° x 60° constant directivity HF horn. The LF driver is intended for high level, high power low frequency reproduction in ported enclosure. The vented die cast chassis an composite glass fire and black anodized aluminum coil formers, yielding extremely low thermal compression. The HF driver utilizes a titanium diaphragm with controlled break-up modes for improved sonic performance. At high frequencies the crossover design and LF cone profile have been optimized to match the directivity of the HF horn and LF section through the crossover region.
Features
Applications
Specifications
Driver: | 1x15"3"VC +2.8" HF |
Impedance: | 8ohm |
Freq Response: | 42Hz-18kHz |
Power Rating: | 450W/900W |
SPL(1W/1M): | 99dB / 124dB |
Coverage: | 90° x 60° |
Dimensions: | 477x690x443 |
Weight: | 34 |